I carried out various stone replacement and repair here. This photo shows some repair work to the upper windows from a cherry picker, where loose stone was near to falling. The dark colour is the wet stone-lime repair which lightens and blends in when dry.
There is also a vertical crack in the window head lintol which we reinforced with pins and repointed.
This gate pier, the right-hand gate attached to it, and a part of the wall itself, were demolished down to the foundations when a car missed the bend and hit the pier head-on. Luckily only a few stones suffered actual damage including the coping, if this had been concrete there would have been shearing effects all over it.
The right-hand gate was bent, this was straightened by www.kingtonforge.co.uk/ and while restoring the pier and its capital (coping) I worked with them refixing the hinges to provide a 10mm tolerance where the gates latch, including room for future adjustment as the wall settles over time. Broken stones were reused within the pier where damage is not visible, and parts of the work involved stainless steel pin repairs.
I understand that the driver walked away from the wreckage.
This clock tower had an eroded Bath stone clock dial. Rolls Royce engineers repaired and remade parts of the derelict clock mechanisms, took the bells away and retuned them, and placed a new bell frame on the tower (the mansion was built by Charles Rolls family). While they were working on the mechanism I repaired the dial and other components, putting new eyes in the ends of the cross, putting reinforcing in to hold the clock face and frame, and cleaned all the stone on the tower including the vinework which was particularly coated in lichen. Needless to say they supplied me with the highest grade stainless steel for all my fixings.
Window sills, lintols, stonework repairs in the worker’s cottages at this World Heritage site.
Alastair cleaned and soda treated Grosmont’s upper Tollstone. This beautiful bi-coloured red and green engraved standing stone marking at toll at this former market town is beginning to delaminate. The weather is penetrating down fissures on its top surface – the stone is laid with its original bed strata vertical – and will need further treatment in the future to protect it from erosion but for now it stands refreshed and better protected.
This project in Monmouth, one of several restoration projects in the town, involved the replacement of a significant amount of Bath stonework around the quoins, plinth courses, gable copings, and finial crosses. We also cleaned and restored the internal faces of the Bath stone windows which had been coated in many layers of blue paint. Bare stone was a definite improvement. Most challenging was the project running through the winter of 2009-10, the freezing temperatures affecting lime and stone repair but with the Spring it all came together.
This picture is a closeup of my early phases of repointing at Kilpeck Church. The mortar using natural lime was developed and specified by John Goom the conservation architect, and has proved compatible with other local conservation requirements since it matches construction mortar in consistency and colour while providing good weather protection breathability and low crush strength. It is shown next to the historic door columns.